The 5000335 and 5001442 mobile-type Rope Grabs are designed to allow maximum freedom of movement. When properly installed, the mobile rope grab automatically follows the worker, hands-free.

The static-type Wire Rope Grab uses a patented wedging action which grips and locks onto the cable lifeline in case of a fall. It stays where you put it and moves when you move it.

Use the lightweight Microloc Trailing Rope Grab to move easily and safely through your work area with greater comfort and less restriction.

The Trailing Rope Grab provides complete hands-free mobility by automatically moving up and down a vertical lifeline without the need to pause for manual adjustments.

This Rope Grab System is built around the Lad-Saf Rope Grab, which is constructed of stainless steel and aluminum and features both a cam lever and a friction-sensitive brake to reduce the forces generated upon the worker in the event of a fall.

The Non-Trailing Rope Grab features a built-in D-Ring for attaching locking snap hooks from any Miller lanyard.

The rugged all-steel construction of the Permanent Roof Anchor creates an anchorage point that lasts as long as the roof it is attached to.

The heavy-gauge steel Reusable Roof Anchor is both durable and versatile.

The RoofGrip provides a temporary roof anchor point for fall protection devices, and fits a variety of roof pitches.

The Standing Seam Roof Anchor is designed to provide an anchorage point on a flat or sloped structural standing seam roof, without the risk of damaging or puncturing the rooftop.

Basic fall protection needs are available in one package with the Titan ReadyRoofer Fall Protection System. The kit includes:

Provide workers with needed fall protection anchorage while they work on flat or sloped roofs.

Provide maximum safety and mobility with the convenient Roofer’s Safety Bag fall arrest system.

A variety of vertical lifelines are available for the Trailing and Non-Trailing Rope Grabs.

The lightweight and compact Titan™ Retractable Lifelines are designed in 20, 30, 50, and 65’ lengths.

The Heavy-Duty Self-Retracting Lifeline is lightweight but tough, with a cast aluminum housing that resists dents and damage, and a high-strength pivoting steel anchorage shackle.

The Sealed Self-Retracting Lifeline extends and retracts automatically to allow the worker to move within the work area at normal speeds.

The Order Picker System with Ultra-Lok Self-Retracting Lifeline is excellent fall protection for operators of Order Pickers. The specially-designed bracket mounts to the Order Picker cab with four included U-bolts.

Unlike acceleration-based seatbelt technology used in other self-retracting lifelines, the Talon Self-Retracting Lifeline uses new technology based on velocity.

Offering the maximum in durable, reliable fall protection, the Ultra-Lok Self-Retracting Lifeline features 3/16” wire rope cable with a glass-filled polyurethane or aluminum housing and stainless steel working components.

The Miller Scorpion Personal Fall Limiter is an economical and effective alternative to shock-absorbing lanyards.

The Miller Black Rhino is one of the most compact and lightweight 9’ self-retracting lifelines available. It is ideal for a variety of concrete construction, welding, steel erection and warehouse applications.

Keep workers safe from falling while they work at heights with the Sayfline Synthetic Horizontal Lifeline System.

The Miller Grip Temporary Horizontal Lifeline Kit has everything needed to provide a temporary two-person lifeline. The reliable system is designed for use in concrete structures and is quick and easy to install.

All of the fall protection equipment needed for roofing applications is available in the FP Pro Roofers’ Kit.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

Rebar Restraint Lanyard Assemblies meet the fall protection needs of those working on wall forms and concrete construction. They fasten securely to anchorage points existing on rebar and other framework.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The rugged FP5K carabiner gives the FP5K Tie-Back Shock-Absorbing Lanyard extreme strength.

The elastic design of the FP Diamond Expanyard allows it to contract, which greatly reduces trip and snag hazards.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The FP Diamond Shock-Absorbing Lanyard features a strong durable sheath with a highly visible deployment tag.

The shock-absorbing Expanyard Dyna-Brake Lanyard is designed to stretch up to 6’ in length.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The 6’ Titan™ Shock-Absorbing Lanyard is constructed of lightweight, durable webbing with locking snap hook or rebar anchorage harness connections.

The strong, safe BackBiter Lanyard is specifically designed for tying back at any angle.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The StretchStop Lanyard stretches from 4 to 6', offering excellent worker mobility.

The Manyard Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The Manyard II contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The Titan T-BAK Lanyard is a pack-type shock-absorbing lanyard designed for tie-back use.

The EZ Stop II Lanyard utilizes a tearing action in the shock-absorbing pack to keep the fall arresting forces under 900 lbs.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

EZ Stop® II shock absorbing lanyards are designed for versatility and are available in many variations including this tie-back model that eliminates the need for a separate anchorage connector. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The EZ Stop III Lanyard combines exceptional strength and ease of use into one safe and effective shock-absorbing lanyard.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The tie-back model EZ Stop II eliminates the need for a separate anchorage connector. All EZ Stop II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.